Three startup way of the Car Security Monitor

  For the startup method of the car monitor, there are

three common methods in the factory menu of the driving car monitor, namely “Power

on and start up”, “Manual startup”, “ Memory startup”.  

  The menu needs to be opened by quickly pressing the “up”, “down”, “left”, “right”, “ middle” button of

the remote control while the car monitor is in standby mode.

1. Power on and start up (the machine will automatically start up after power on)

After setting "POWER" to "ON" in the factory menu, the display

screen will automatically turn on after disconnecting the power and then

turning it on again.

2. Manual startup

After setting "POWER" to "OFF" in the factory menu, turning on

the display screen after disconnecting the power requires manually pressing the

power button on the car monitor to turn it on.

3. Memory startup (remember the state of the last power outage)

After setting "POWER" to "SAVE" in the factory menu, the display

screen will automatically remember the status of the last power outage, and

when powered on again, it will display the status of the last power on or off.

  Overall, Car monitor have three ways to turn on the car monitor screen through the factory menu: “Power

on and start up”, “Manual startup”, “ Memory startup”. Different startup methods are suitable for

different scenarios and needs, and can choose according to driver needs and

habits. In the future, with the development of and technological progress,

believed that the Startup method of car monitor will also become increasingly intelligent.